SUBSCRIBE & SAVE 10%!

Product details

Description


The Phoenix 24/1200 VE.Direct inverter allows you to power domestic equipment – requiring 230V – using leisure or automotive batteries rated at 12V, 24V or 48V DC.

This unit has the IEC plug.
 
Features of the Phoenix Inverter 24/1200 VE.Direct
VE.Direct communication port
The VE.Direct port can be connected to:

  • A computer (VE.Direct to USB  an interface cable needed)
  • Apple and Android smartphones, tablets, computers and other devices (VE.Direct Bluetooth Smart dongle an needed)
Fully configurable:
  • Low battery voltage alarm trip and reset levels
  • Low battery voltage cut-off and restart levels
  • Dynamic cut-off: load dependent cut-off level
  • Output voltage 210 – 245V
  • Frequency 50 Hz or 60 Hz
  • ECO mode on/off and ECO mode sense level 
Monitoring:
  • In- and output voltage, % load and alarms
 Proven reliability
The full bridge plus toroidal transformer topology has proven its reliability over many years. The Phoenix Inverter 24/1200 VE.Direct are short circuit proof and protected against overheating, whether due to overload or high ambient temperature.
 
High start-up power
Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools.
 
ECO mode
When in ECO mode, the Phoenix Inverter 24/1200 VE.Direct will switch to standby when the load decreases below a preset value (min load: 15W). Once in standby the inverter will switch on for a short period (adjustable, default: every 2,5 seconds). If the load exceeds a preset level, the inverter will remain on.
 
Remote on/off
A remote on/off switch can be connected to a two pole connector, or between battery plus and the left hand contact of the two pole connector.
 
DC connection with screw terminals
No special tools needed for installation.
 
Monitor, operate & control your system
VictronConnect lets you get live status information and configure your Phoenix Inverter 24/1200 VE.Direct when connected to a VE.Direct Bluetooth Smart Dongle.
 
The REC040010210R is the correct controller for the Phoenix Inverter VE.Directs.