QUESTIONS? VISIT THE CONTACT US PAGE.
Newpowa - 200W 12V Monocrystalline Rigid Solar Panel
Newpowa - 200W 12V Monocrystalline Rigid Solar Panel
Newpowa - 200W 12V Monocrystalline Rigid Solar Panel
Newpowa - 200W 12V Monocrystalline Rigid Solar Panel
Newpowa - 200W 12V Monocrystalline Rigid Solar Panel
Newpowa - 200W 12V Monocrystalline Rigid Solar Panel

New Powa

Newpowa - 200W 12V Monocrystalline Rigid Solar Panel

$219.99
In stock

Pickup available at 121 Venture Blvd.

Usually ready in 24 hours

Pairs well with

Product details

Description

Newpowa's 200W 12V Monocrystalline High-Efficiency Solar Panel is commonly used in RV, marine, overlanding, traffic signals and various off-grid applications. 

Data Sheet

SPECS:

  • Product Code NPA200S-12I
  • Maximum power (Pmax) 200W
  • Voltage at Pmax (Vmp) 18.6V
  • Current at Pmax (Imp) 10.76A
  • Open-circuit voltage (Voc) 21.80V
  • Short-circuit current (Isc) 11.47A
  • Temperature coefficient of Voc -(80±10)mV/°C
  • Temperature coefficient of Isc (0.065±0.015)%/ °C
  • Temperature coefficient of power -(0.5±0.05)%/ °C
  • NOCT (Air 20°C; Sun 0.8kW/m2 wind 1m/s) 47±2°C
  • Operating temperature -40°C to 85°C
  • Maximum system voltage 1000V DC
  • Power tolerance ± 3%
  • Maximum Series Fuse Rating 15A

Sku: NPA200S-12l

 

Features

- Under ideal conditions, 9 busbar PV module will outperform the dated 5 and 6 busbar technology. The void space reduction between the 9BB solar cells is designed to enhance the overall efficiency of the PV module by lowering current lengths and mitigating against loss of output.

- Reduction in footprint by ~20%

- Higher cells efficiency, better light converting rate

- Maximum Efficiency: 21.3%

- Nominal 12V DC for standard output

- Heavy-duty anodized frame with pre-drilled holes for mounting

- Rugged design to withstand high winds (2400Pa), hail, and snow load (5400Pa)

- High-transparent, low iron tempered glass

- Durable TPT back sheet - dissipates heat to insure better panel performance and lifespan

- Pre-installed bypass diodes inside junction box that minimize power drops caused by shading

- Pre-attached 3ft wire with connectors (M/F)

- Compatible mount brackets (sold separately): NPB-UZ (2 sets recommended), NPB-200P, NPB-400P

Dimensions

Dimensions: 1404 x 705 x 33mm (55.28 x 27.76 x 1.38 in)