These wheel well boxes offer effortless access, perfect for a busy garage. Enjoy generous storage space, along with a delightful appearance and robust construction. With this set, you can also hide most wheel well water tanks and electrical setups.
This comes in a set of (2) wheel well boxes and optional 2-piece or 4-piece removable bed.
- Lightweight Construction and Easy to Install
- Both Boxes are mirrored with tall access doors at back of vehicle
- Accessible from both within the vehicle and from rear doors
- Built to fit nearly all water tank and electrical systems with water level sight notch on tank side. Perfect Fit for the Northwest Conversions 20gal tank.
- Designed to slip over pre-mounted water tank or internally mounted
- Soft close hinges with adjustable latches
- Upper doors feature gas-piston lift assist for easy access
- Plug & Play for Sprinters, Transits, and Promasters
- Prefinished Maple
- Unfinished Maple
- Prefinished Amber Bamboo
Outside Dimensions: 54"-72" Width x 33" Height x 18" Depth
The different widths are specifically optimized for different vehicles.
54": Fits Sprinter 144", Promaster 136", and Transit 148"
60": Fits Sprinter 144", Fits Sprinter 170", Promaster 159", Transit 148".
66": Fits Sprinter 170"/170"EXT, Promaster 159"/159"EXT, Transit 148"/148"EL
72": Fits Sprinter 170"/170"EXT, Promaster, 159"EXT, Transit 148"EL
Installation Difficulty: Easy | 2 people
Installation Time: 1 Hour
Tools Needed: Power Drill, Rivet Nut Tool, Screw Driver, Drill Bits
- How do wheel well boxes mount?
The wheel well boxes are designed to shoot into the wall and the sub-floor. We recommend using rivet nuts inserts for the wall but self-tapping screws will work for most builds.
- What goes inside of the wheel well boxes?
The wheel well boxes are designed to house all water tanks, plumbing, and electrical. Easy access hinged doors allow you to get in and out for a smooth installation and maintenance. Electrical equipment may be mounted to the inside of the wheel well box or to the wheel well panels behind the box. We would recommend cutting ventilation for electrical equipment, heaters, or pumps.
-
How do I apply paint, stain, or sealer?
Painting:
- Lightly scuff the entire surface of the cabinet that you plan on coating with 120-180 grit sandpaper.
- Apply 2-3 coats of primer prior to applying your main coat.
- Always apply a finish when you're happy with the paint to get a long lasting appearance.
Staining:
- Sand the surface on all faces with sandpaper traveling with the grain of the wood.
- Apply stain very cautiously to a section of the cabinet that will not be visible to gage the volume and pressure you need to achieve the look you want.
- Apply stain evenly with a rag, sponge, or spray gun until all surfaces are coated.
- Please note that overlapping surfaces may make the stain darker on the overlapped areas.
- Always apply a finish when you're happy with the stain to get a long lasting appearance.
These wheel well boxes offer effortless access, perfect for a busy garage. Enjoy generous storage space, along with a delightful appearance and robust construction. With this set, you can also hide most wheel well water tanks and electrical setups.
This comes in a set of (2) wheel well boxes and optional 2-piece or 4-piece removable bed.
- Lightweight Construction and Easy to Install
- Both Boxes are mirrored with tall access doors at back of vehicle
- Accessible from both within the vehicle and from rear doors
- Built to fit nearly all water tank and electrical systems with water level sight notch on tank side. Perfect Fit for the Northwest Conversions 20gal tank.
- Designed to slip over pre-mounted water tank or internally mounted
- Soft close hinges with adjustable latches
- Upper doors feature gas-piston lift assist for easy access
- Plug & Play for Sprinters, Transits, and Promasters
- Prefinished Maple
- Unfinished Maple
- Prefinished Amber Bamboo
Outside Dimensions: 54"-72" Width x 33" Height x 18" Depth
The different widths are specifically optimized for different vehicles.
54": Fits Sprinter 144", Promaster 136", and Transit 148"
60": Fits Sprinter 144", Fits Sprinter 170", Promaster 159", Transit 148".
66": Fits Sprinter 170"/170"EXT, Promaster 159"/159"EXT, Transit 148"/148"EL
72": Fits Sprinter 170"/170"EXT, Promaster, 159"EXT, Transit 148"EL
Installation Difficulty: Easy | 2 people
Installation Time: 1 Hour
Tools Needed: Power Drill, Rivet Nut Tool, Screw Driver, Drill Bits
- How do wheel well boxes mount?
The wheel well boxes are designed to shoot into the wall and the sub-floor. We recommend using rivet nuts inserts for the wall but self-tapping screws will work for most builds.
- What goes inside of the wheel well boxes?
The wheel well boxes are designed to house all water tanks, plumbing, and electrical. Easy access hinged doors allow you to get in and out for a smooth installation and maintenance. Electrical equipment may be mounted to the inside of the wheel well box or to the wheel well panels behind the box. We would recommend cutting ventilation for electrical equipment, heaters, or pumps.
-
How do I apply paint, stain, or sealer?
Painting:
- Lightly scuff the entire surface of the cabinet that you plan on coating with 120-180 grit sandpaper.
- Apply 2-3 coats of primer prior to applying your main coat.
- Always apply a finish when you're happy with the paint to get a long lasting appearance.
Staining:
- Sand the surface on all faces with sandpaper traveling with the grain of the wood.
- Apply stain very cautiously to a section of the cabinet that will not be visible to gage the volume and pressure you need to achieve the look you want.
- Apply stain evenly with a rag, sponge, or spray gun until all surfaces are coated.
- Please note that overlapping surfaces may make the stain darker on the overlapped areas.
- Always apply a finish when you're happy with the stain to get a long lasting appearance.
