A complete 350 Watt Solar Kit with Ready to Install 8020 Roof Rack for Ram 2500 159WB
Free shipping for a limited time only!
Are you tired of spending endless amounts of time trying to figure out how much solar you need, which brands you are going to buy, what size cable and fuse you need, and on top of that how you will mount this to your Ram ProMaster Van Roof? Well you are in luck because Unaka Gear Co has done the hard work for you. This kit comes with everything you need to get started with your electrical system and all the parts ready to install for your roof rack.
Customization: If this specific system does not meet your exact needs just let us know. We can easily modify the solar set up or the roof rack set up to meet your specific needs whether it is more or less power or more or less rack.**
Vans: If you have a Ram 1500 or 3500 we can modify this kit to meet your needs and the price will be slightly lower or slightly higher respectively.
Solar System Highlights:
This kit has everything you need to harvest energy from the Sun and get it from your van roof to your buss bar.
- 2 x Renogy 175W Solar Panels
- 1 x 20Amp In-line MC4 fuse
- 1 x Set of #8AWG cables with MC4 connectors on one end
- 1 x Switch between the solar panels and the charge controller
- 1 x Victron Smartsolar MPPT Charge Controller - 100V - 30Amp
- 1 x Blue Sea 30Amp Thermal Circuit Breaker
- 1 x Set of additional #8AWG cable to go from your Charge Controller to your buss bar
- All cable lugs and heat shrink to make connections to the equipment we are providing
Roof Rack Highlights:
This kit has everything you need to install and mount your solar panels to your Ram ProMaster. All components are cut to length so all you have to do is bolt it together.
- 4 x Sets of Unaka Ram ProMaster Roof Rack Brackets (8 Total)
- 4 x Sets of Unaka 8020 Adapter Brackets (8 Total)
- 2 x Sets of Unaka Flush Mount Solar Panel Mounting Brackets (8 Total)
- 2 x Sets of Unaka Flush Mount Solar Panel Bracket 8020 Hardware Kits
- 1 x Pair of 15 Series 8020 Side Rails with joining plates
- 3 x 15 Series 8020 Cross Bar Assemblies
- 1 x Wind Fairing with Brackets
- All required hardware to assembly the rack above
- All parts are cut to length and ready to install
As always if you have any questions about how to use these brackets, how to install them, common configurations, which hardware length to use with these brackets for your project let us know. We are here to help!
Lead Time: Updated 4/27/2021: Due to production delays at 8020, typical lead times are currently 3 to 5 weeks until the product ships. Orders can occasionally be expedited for an additional cost.
Features and Benefits
- Robust Design
- Ready to Install
- Flush Mount solar panel brackets make for a aerodynamic low profile sleek look.
- 15 Series 8020 is rigid and will support your panels and more
- Any tools required for this installation
- Sealant to install the Roof Cable Pass Through
- Electrical Tape
- Zip Ties
- Cable mounts
- Mounting screws or hardware for the Solar Charge Controller, fuses, etc.
- Any tools required to install any of the items above
Installation Notes: Full set of installation instructions will be provided with each solar / rack kit