A sleek twist on our classic rounded overhead cabinets for those looking to save a little head-room. Each upper cabinet is pre-assembled and ships in modular 36" - 44" sections (two doors) that may be combined for longer sections. These cabinets are paint grade, easy to mount, and a beautiful addition to your van.
NOTE: Paint options consist of a satin paint with a Prefinished Maple base. Only the exterior is painted, leaving the inside and back of the cabinet to show the Prefinished Maple. Paint and sealed options do ADD 7 days onto production time.
- Large door for easier storage access
- Satin steel pushbutton latches for an elegant closure
- 1.5" Curved edge for a more modern look
- Cabinets mount to walls, ceiling panels, headliner, OR can be screwed into overhead frame (Rivet Nuts Recommended)
- Cabinets are made from veneer plywood. Stains appear on veneer as with natural lumber, but exposed grains on inside of cabinet show
- Back curve is cut to match your vehicle make/model.
- Lights are not wired to ballast. You will need to wire to ballast and central power system on your own.
- Robust Construction can hold heavy cargo without breaking. Not rated for more than 100lbs of storage per cabinet.
Materials:
- Unfinished Alder (For Darker Stains) See Note
- Unfinished Birch (Suited for Painting Only)
- Prefinished Maple (No finish needed)
- Natural Bamboo (Finish needed)
Dimensions:
- These cabinets are 36" - 44" long. They can be mounted side by side to cover the full length of any vehicle. Size is 12" Depth x 15.5" Height.
Weight: Approx. 38lbs per 40" section
Load Capacity: 100lbs per 20" section
Installation Difficulty: Medium | 2 people
Installation Time: 1 Hour
Tools Needed: Power Drill, Rivet Nut Tool, Screw Driver, Drill Bits
Promaster Models:
These cabinets are cut to match the curvature of the ceiling and walls. ProMasters have a uniquely flat rear profile and top profile unlike other models. Note: ProMaster cabinets have a 1/8" cutting channel on the top corner of each sidewall that serves as a cutting guide in case one of the overhead beams prevents the cabinets from fitting against the wall. This cutting channel is a guide on where to cut to notch your cabinets to bypass the protruding beam.
A sleek twist on our classic rounded overhead cabinets for those looking to save a little head-room. Each upper cabinet is pre-assembled and ships in modular 36" - 44" sections (two doors) that may be combined for longer sections. These cabinets are paint grade, easy to mount, and a beautiful addition to your van.
NOTE: Paint options consist of a satin paint with a Prefinished Maple base. Only the exterior is painted, leaving the inside and back of the cabinet to show the Prefinished Maple. Paint and sealed options do ADD 7 days onto production time.
- Large door for easier storage access
- Satin steel pushbutton latches for an elegant closure
- 1.5" Curved edge for a more modern look
- Cabinets mount to walls, ceiling panels, headliner, OR can be screwed into overhead frame (Rivet Nuts Recommended)
- Cabinets are made from veneer plywood. Stains appear on veneer as with natural lumber, but exposed grains on inside of cabinet show
- Back curve is cut to match your vehicle make/model.
- Lights are not wired to ballast. You will need to wire to ballast and central power system on your own.
- Robust Construction can hold heavy cargo without breaking. Not rated for more than 100lbs of storage per cabinet.
Materials:
- Unfinished Alder (For Darker Stains) See Note
- Unfinished Birch (Suited for Painting Only)
- Prefinished Maple (No finish needed)
- Natural Bamboo (Finish needed)
Dimensions:
- These cabinets are 36" - 44" long. They can be mounted side by side to cover the full length of any vehicle. Size is 12" Depth x 15.5" Height.
Weight: Approx. 38lbs per 40" section
Load Capacity: 100lbs per 20" section
Installation Difficulty: Medium | 2 people
Installation Time: 1 Hour
Tools Needed: Power Drill, Rivet Nut Tool, Screw Driver, Drill Bits
Promaster Models:
These cabinets are cut to match the curvature of the ceiling and walls. ProMasters have a uniquely flat rear profile and top profile unlike other models. Note: ProMaster cabinets have a 1/8" cutting channel on the top corner of each sidewall that serves as a cutting guide in case one of the overhead beams prevents the cabinets from fitting against the wall. This cutting channel is a guide on where to cut to notch your cabinets to bypass the protruding beam.