This elegant and sturdy Galley is a beautiful addition to your van conversion. This galley ships pre-assembled and ready to stain or install.
- Cabinet Constructed in prefinished maple with a beautiful amber bamboo slab
- Sink compartment with hinged door cover
- Soft Close Blum Hinges with Adjustable height, angle, and depth
- Refrigerator compartment + soft close pullout drawer for cutlery storage
- Satin black adjustable marine-grade adjustable latches
- Cabinet prefinished with a satin hardened urethane seal
- Installation hardware included
- Back is prefinished and can be exposed to outside slider
Dometic CRX-65 Specs
Dometic CRX-80 Specs
Standard Size:
Cabinet: 40" Wide x 23.5" Deep x 36" Tall
Weight: ~120lbs with no appliances
Our Galleys are designed to fit your walls with screws or with Rivet Nuts.
Installation Difficulty: easy | 2 people
Installation Time: 30 minutes
Tools Needed: Power Drill, Rivet Nut Tool
- - Prefinished Maple (Already finished for you, no need to stain)
- - Amber bamboo is a 3/4" 3-ply with a satin finish.
- - Sink included is black Nano Sink. Plumbing is not included/completed on the sink, it's drop-in only. Sink cutout will be made for you and a matching slab insert is included as a lid. The nano sink does not come with strainer.
- How do I install the galley?
Mounting to the wall: Our galleys are designed to mount to the wall of the vehicle. You can measure and mark a section of solid wall truss/beam behind the cabinet to approximate before shooting a screw or rivet nut into the wall. We recommend a minimum of three rivet nuts or 5 self-tapping screws to hold the galley in place.
When mounting the sink make sure to properly install the sink using the hardware provided with the sink. It is never wise to simply drop in a sink with no mounting brackets or silicone seal around the edges of the sink.
If you install a refrigerator it is required to cut inlet and outlet ventilation holes for the unit to cool down with posing a fire risk. Refer to your refrigerator unit manual to learn more on air flow direction and ventilation requirements.
- How do I know if the galley will fit my vehicle?
These galleys are designed to take up the space right behind the driver seat in most vehicles. This unit may also be placed elsewhere in the vehicle.
For Promaster Models: The galleys are designed to have an angled cutout in the back of the cabinet to clear the dropped floor and allow the unit to sit flush against the wall. The Promaster models also have a structural pillar in the cargo section of the vehicle that will prevent the galley from being flush with the wall if mounting to the pillar. Because of this, we recommend mounting galleys to the left or right of the structural pillars.
- How do I apply paint?
If you plan on painting:
- lightly scuff the entire surface of the cabinet that you plan on coating with 120-180 grit sandpaper.
- Apply 2-3 coats of primer prior to applying your main coat.
- Always apply a finish when you're happy with the paint to get a long lasting appearance.
This elegant and sturdy Galley is a beautiful addition to your van conversion. This galley ships pre-assembled and ready to stain or install.
- Cabinet Constructed in prefinished maple with a beautiful amber bamboo slab
- Sink compartment with hinged door cover
- Soft Close Blum Hinges with Adjustable height, angle, and depth
- Refrigerator compartment + soft close pullout drawer for cutlery storage
- Satin black adjustable marine-grade adjustable latches
- Cabinet prefinished with a satin hardened urethane seal
- Installation hardware included
- Back is prefinished and can be exposed to outside slider
Dometic CRX-65 Specs
Dometic CRX-80 Specs
Standard Size:
Cabinet: 40" Wide x 23.5" Deep x 36" Tall
Weight: ~120lbs with no appliances
Our Galleys are designed to fit your walls with screws or with Rivet Nuts.
Installation Difficulty: easy | 2 people
Installation Time: 30 minutes
Tools Needed: Power Drill, Rivet Nut Tool
- - Prefinished Maple (Already finished for you, no need to stain)
- - Amber bamboo is a 3/4" 3-ply with a satin finish.
- - Sink included is black Nano Sink. Plumbing is not included/completed on the sink, it's drop-in only. Sink cutout will be made for you and a matching slab insert is included as a lid. The nano sink does not come with strainer.
- How do I install the galley?
Mounting to the wall: Our galleys are designed to mount to the wall of the vehicle. You can measure and mark a section of solid wall truss/beam behind the cabinet to approximate before shooting a screw or rivet nut into the wall. We recommend a minimum of three rivet nuts or 5 self-tapping screws to hold the galley in place.
When mounting the sink make sure to properly install the sink using the hardware provided with the sink. It is never wise to simply drop in a sink with no mounting brackets or silicone seal around the edges of the sink.
If you install a refrigerator it is required to cut inlet and outlet ventilation holes for the unit to cool down with posing a fire risk. Refer to your refrigerator unit manual to learn more on air flow direction and ventilation requirements.
- How do I know if the galley will fit my vehicle?
These galleys are designed to take up the space right behind the driver seat in most vehicles. This unit may also be placed elsewhere in the vehicle.
For Promaster Models: The galleys are designed to have an angled cutout in the back of the cabinet to clear the dropped floor and allow the unit to sit flush against the wall. The Promaster models also have a structural pillar in the cargo section of the vehicle that will prevent the galley from being flush with the wall if mounting to the pillar. Because of this, we recommend mounting galleys to the left or right of the structural pillars.
- How do I apply paint?
If you plan on painting:
- lightly scuff the entire surface of the cabinet that you plan on coating with 120-180 grit sandpaper.
- Apply 2-3 coats of primer prior to applying your main coat.
- Always apply a finish when you're happy with the paint to get a long lasting appearance.